Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 54 / 209

52
7. Operation
(e) LED TEST
This screen is used to test the LED lighting.
In the I/O TEST Screen on page 45, select LED TEST and press the Enter button. The LED TEST
screen appears.
LED TEST
[ON:RED]
SELECT SW:CHOOSE ENTER SW:ENTER
ALL OFF
1P START OFF
2P START OFF
2D/3D SWITCH ON
CEILING LIGHT OFF
EXIT
(1)
(2)
(3)
(4)
(5)
LED TEST screen
Item Description
(1) ALL When this is set to ON, all LEDs light up.
(2) 1P START When this is set to ON, the 1P START button LED lights up.
(3) 2P START When this is set to ON, the 2P START button LED lights up.
(4) 2D/3D SWITCH When this is set to ON, the 2D/3D switching button LED lights up.
(5) CEILING LIGHT When this is set to ON, the ceiling light LED inside the cabinet lights up.
Flip the Select switch up or down to select an item, and press the Enter button to switch the corresponding
LED ON and OFF.
The default setting is OFF, indicated in white. When set to ON, the setting is indicated in red.
* Each LED is lit up when ALL is set to ON or the corresponding item is ON.
* (5) CEILING LIGHT only fades on and off over approximately 2 seconds.
Select EXIT and press the Enter button to return to the I/O TEST screen.