Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 86 / 209

84
8A. Installation and Assembly
- Must be performed by a technician -
8A-4-7 Installing the Top Cover Center and Top Cover Sides (L) and (R)

The top cover center, top cover side (L) and top cover side (R) are installed while standing in a
high location. Use a stool or ladder. Working in an unnatural body posture may result in injury
or machine damage.
Remove the two flat washers (M6) and two button head bolts (M6 x 20) from each side of the rear
assembly top surface (total four washers and four bolts), and remove the two rope hooks. The removed
two rope hooks, four flat washers (M6) and four button head bolts (M6 x 20) are used during movement
and transport, so be sure to keep them in a safe place.
[L side] [R side]
Rope hook (D) Rope hook (D)
Rear assembly
(Top cover side)
Button head bolt (M6 x 20)
Flat washer (M6)
Button head bolt (M6 x 20)
Flat washer (M6)
Install the signboard side bracket (R) to the L side with two Torx bolts (M5 x 8). Perform the same
procedure to install the signboard side bracket (R) to the R side.
[L side] [R side]
Torx bolt (M5 x 8)
Torx bolt (M5 x 8)
Signboard side bracket (R)
Signboard side bracket (R)