Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 30 / 209

28
6. Moving and Transporting

Do not leave the machine on a slope. It may fall over or result in an accident.

When moving the machine, first attach the transport casters to the rear assembly, and then
separate the assemblies and parts. Failure to do so may cause the machine to fall over or result
in an accident.
6-1 Moving (On the Same Floor)

When moving the machine, first separate the front assembly, center assembly, rear assembly,
signboard box assembly, curtain, side walls L and R, and roof.

Even when moving the machine only a short distance, be sure to raise the level adjusters of the front
assembly, center assembly and rear assembly to their highest level. (See “8A-4-9 Level Adjuster
Adjustment” on page 90.)

Move the machine carefully to avoid damaging it.

Handle the communication cable and power cord carefully.
Be especially careful when connecting and disconnecting the communication cable connectors.
(See “8A-6 Connecting the Communication Cable” on page 92 and “8A-7 Connecting the Power
Cord and Ground” on page 93.)