Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 32 / 209

30
6. Moving and Transporting
6-2-2 Loading and Unloading to and from a Vehicle

Before transporting the machine manually, be sure to first attach the transport casters to the rear assembly,
and then separate the front assembly, center assembly, rear assembly, signboard box assembly, curtain,
side walls L and R, and roof. (See “8A-4 Assembly” on page 68.)

When using a forklift to transport the front assembly, center assembly and rear assembly, observe the
following.
Failure to observe the following instructions may result in an accident, such as the machine falling over.
• Be sure to insert the fork to the specified positions.
•
Make sure that the machine is balanced properly during transportation.
Rear assembly
Transport casters
Front assembly
Center assembly
Fork sticker

When manually loading or unloading to or from a vehicle, perform the work according to “6-2-1 Transporting
Manually (Such as Carrying on Stairs)” on page 29.

Move the machine carefully to avoid damaging it.

Be sure to raise the level adjusters of the front assembly, center assembly and rear assembly to
their highest level. (See “8A-4-9 Level Adjuster Adjustment” on page 90.)

Do not subject the machine to impact when lowering it.