Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 130 / 209

128
8B. Service
- Must be performed by a technician -

When installing, check the connector orientation, and insert the connector firmly until it locks
securely.

When installing, be careful not to pinch the connectors and harness.
To install, perform the procedure in reverse.

After replacement, be sure to check operation in Test mode. (See “7-7-4(a) SWITCH TEST” on page
46.)
(5) Replacing the Trigger and Spring

To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the lever arm (L). (See step
of “8B-4-3(4) Replacing the Micro Switch” on page 127.)
When an abnormality occurs in the trigger and spring, replace the abnormal parts.

Install the spring as shown in the figure, and check that the spring is set firmly against the trigger
and the lever arm (R).
Trigger
Lever arm (R)
Attach the spring in the position
shown in the figure.
Spring
Install the lever arm (L) by reversing the procedure. (See step of “8B-4-3(4) Replacing the Micro
Switch” on page 127.)