34
7. Operation
7-4 Pre-operation Inspection
Check the items below before starting machine operations.
If there is an abnormality, resolve it by referring to “8B-2 Troubleshooting” on page 98.
7-4-1 Safety Inspection (Before Power On)
Before operating the machine, check the following locations. This is required to prevent
accidents or injuries.
(1) Are all warning labels legible?
(See “1-4 Machine Warning Labels” on page 3.)
(2) Are all level adjusters adjusted properly so that the machine is stable?
(Front assembly, center assembly and rear assembly) (See “8A-4-9 Level Adjuster Adjustment” on page
90.)
(3) Is the specified play zone provided? (See “5-1-2 Play Zone for the Installed Machine” on page 25.)
(4) Are the front assembly and center assembly fixed securely to each other?
(See steps and of “8A-4-1 Connecting the Front Assembly and Center Assembly” on page 68.)
(5) Are the center assembly and rear assembly fixed securely to each other?
(See step of “8A-4-4 Connecting the Center Assembly and Rear Assembly” on page 78.)
(6) Is the signboard box assembly fixed securely?
(See “8A-4-5 Installing the Signboard Box Assembly” on page 80.)
(7) Are the gun assembly screws tightened securely? (See “8B-4-3 Gun Assembly” on page 121.)
(8) Is the power cord laid out safely so that it will not cause players or other customers to trip over it?
(9) Is the power cord securely connected to the outlet and the cord box assembly of the machine? (See
“8A-7 Connecting the Power Cord and Ground” on page 93.)
(10) Is the seat guard tarpaulin damaged?
(See “8B-4-4(5) Replacing the DC Brushless Motor and Rotor Cover” on page 143.)
(11) Are the 3D glasses broken, cracked or sharp in any areas?
(See “8B-4-4(8) Replacing the 3D Glasses” on page 156.)
(12) Are the lenses of the 3D glasses scratched or dirty?
(See “8B-4-4(8) Replacing the 3D Glasses” on page 156.)
(13) Is the glasses cleaning cloth dirty or otherwise unpleasant to use?
(See “8B-4-4(9) Replacing the Glasses Cleaning Cloth” on page 157.)
Содержание DARK ESCAPE 4D
