Bandai Namco DARK ESCAPE 4D, Руководство по эксплуатации

Страница: 118 / 209

116
8B. Service
- Must be performed by a technician -
Connector
USIO PCB base
Phillips pan head
screw
(with flat and
spring washers)
(M5 x 20)
Phillips pan head screw
(with flat and spring
washers)
(M5 x 20)
Faston terminal
Connector
8B-4-2 Center Assembly
(1) Replacing the USIO (T) PC Board

To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.

PC boards are sensitive to static electricity. If a person handles a PC board while charged with static
electricity, the parts on the PC board may be damaged. Before handling a PC board, discharge the
static electricity from your body; for example, by touching the surface of grounded metal.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the service panel L on the L side of the center assembly. (See step
of “8A-4-1 Connecting
the Front Assembly and Center Assembly” on page 68.)
Disconnect the seven connectors and the Faston terminal, remove the two lower and loosen the two
upper Phillips pan head screws (with flat and spring washers) (M5 x 20), and remove the USIO PCB
base.