Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 135 / 296

135
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Standard 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for Standard 2 of 5 Length Control on page 134 .
Length 1 is the minimum label length if in Variable Length: For variable length decoding, a mini-
mum and maximum length may be set. on page 134 Mode, or the first fixed length if in Fixed
Length: For fixed length decoding, two different lengths may be set. on page 111 Mode. Length
includes the barcode’s check and data characters. The length can be set from 1 to 50 charac-
ters.
Table Standard 2 of 5 Length 1 Setting Examples provides some examples for setting Length 1.
See page 232 if you want detailed instructions on setting this feature.
Standard 2 of 5
Length 1 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Character 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
4
Scan Two
Characters
From
Appendix
18, Use the
barcodes in this
appendix to enter
numbers as you
would select
digits/characters
from a keypad.
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
08 = Length 1 is 8 Characters