Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 175 / 296

175
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Plessey Set Length 1
This feature specifies one of the barcode lengths for Plessey Length Control on page 174 . Length
1 is the minimum label length if in Variable Length: For variable length decoding, a minimum and
maximum length may be set. on page 231 Mode, or the first fixed length if in Fixed Length: For
fixed length decoding, two different lengths may be set. on page 231 Mode. Length includes the
barcode’s data characters only. The length can be set from 01 to 50 characters.
Table Plessey Length 1 Setting Examples provides some examples for setting Length 1. See
page 232 for detailed instructions on setting this feature.
Plessey Length 1
Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Characters
07
Characters
15
Characters
50
Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two
Characters From
Appendix 18, Use
the barcodes in this
appendix to enter
numbers as you
would select digits/
characters from a
keypad.
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CPLL1
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character