Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 42 / 296

42
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
ACK NAK Retry
Count This feature specifies the number of times the reader retries a label transmission due to a retry
condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and a
selection of 255 specifies unlimited retries.
See page 229 for more information.
$CR2AR
Select ACK NAK Retry Count Setting
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by
the digits from the Alphanumeric characters
in
Appendix D , Use the barcodes in this
appendix to enter numbers as you would
select digits/characters from a keypad.
repre-
senting your desired character(s). End by
reading the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
~
CANCEL
DEFAULT
003 = 3 Retries
ACK NAK Error
Handling This feature specifies the method the reader uses to handle receive errors detected while waiting
for an ACK character from the host.
DEFAULT
EH00(CR
ACK NAK Error Handling =
Ignore Errors Detected
2EH01(CR
ACK NAK Error Handling =
Process Error as Valid ACK Character
EH02(CR
ACK NAK Error Handling =
Process Error as Valid NAK Character