Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 167 / 296

167
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Code 93 Set Length 2
This feature specifies one of the barcode lengths for Code 93 Length Control on page 165 .
Length 2 is the maximum label length if in Variable Length: For variable length decoding, a mini-
mum and maximum length may be set. on page 231 Mode, or the second fixed length if in Fixed
Length: For fixed length decoding, two different lengths may be set. on page 231 Mode. Length
includes the barcode’s check, data, and full-ASCII shift characters. The length does not include
start/stop characters. The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table CODE 93 Length 2 Setting Examples provides examples for setting Length 2. See
page 232 for detailed instructions on setting this feature.
CODE 93 Length
2 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore
This Length)
07
Characters
15
Characters
50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 2 SETTING
4
Scan Two
Characters From
Appendix 18, Use
the barcodes in this
appendix to enter
numbers as you
would select digits/
characters from a
keypad.
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L2
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters