Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 17 / 296

17
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
2
Introduction
2.5.1 Using the
Bluetooth base
(cradle)
Bluetooth base LEDs
LEDs on the Base provide information about the Base as well as battery charging status, as
shown.
Yellow LED
Red LED /

Green LED
Figure 1: Base LEDs
LED STATUS
Power on / Data
Yellow On = Base is powered
Yellow Blinking = Base receives data and commands
from the Host or the Reader.
Charging Red On = Battery charging is in progress.
Charge completed Green On = the Battery is completely charged.
Ch Charge completed
Red and Green Blinking together = the Reader is not
correctly placed onto the Base.
2.5.2 Charging the
Batteries
The battery can be charged by connecting the reader directly to a host through the micro-USB
connector available in the bottom of the handle, as shown.
Micro-USB
Connector
Alternatively, simply insert the handheld reader into the base. When the reader is fully seated in
the cradle, it will sound a “chirp” to indicate that the cradle has detected the reader connection.
The LEDs on the base will indicate the status of the battery.
Before using the Battery, read “Battery Safety” in the following section. Balluff
recommends annual replacement of rechargeable battery packs to ensure
maximum performance.