Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 161 / 296

161
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the barcode lengths for GS1 DataBar™ Expanded Length Control on
page 159 . Length 2 is the maximum label length if in Variable Length: For variable length decod-
ing, a minimum and maximum length may be set. on page 231 Mode, or the second fixed length
if in Fixed Length: For fixed length decoding, two different lengths may be set. on page 231
Mode. Length includes the barcode’s data characters only. The length can be set from 1 to 74
characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table GS1 DataBar™ Expanded Length 2 Setting Examples provides examples for setting
Length 2. See page 232 for detailed instructions on setting this feature.
GS1 DataBar™
Expanded
Length 2 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (ignore
second
length)
07 Characters 52 Characters 74 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
4
Scan Two Characters
From
Appendix 18, Use
the barcodes in this
appendix to enter
numbers as you would
select digits/characters
from a keypad.
‘0’ and ‘0’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ and ‘4’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2
Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
74 = Length 2 is 74 Characters