Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 32 / 296

32
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
4 Complete the programming sequence by reading the ENTER/EXIT PROGRAMMING barcode
to exit Programming Mode.
For more detailed descriptions, programming information and examples for setting selected con-
figuration items, see
"References" on page 223 .
By default, the handheld will decode barcode labels only when they are
close to the center of the aiming pattern. This allows the handheld to accu-
rately target labels when they are placed close together, such as on a pick
sheet. See
"Pick Mode" on page 78 .
Global Interface
Features The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set to ignore,
the reader will ignore all host commands except for those necessary for:
- service mode
- flash programming mode
- keeping the interface active
- transmission of labels.
DEFAULT
$CIFIH00(CR)
Host Commands = Obey
(Do Not Ignore Host Commands)
$CIFIH01(CR)
Host Commands = Ignore
USB Suspend
Mode This setting enables/disables the ability of USB interfaces to enter suspend mode.
DEFAULT
CUSSE00(C
USB Suspend Mode = Disable
$CUSSE01(C
USB Suspend Mode = Enable