Balluff BVS HS-QB-SDR-MA-02-02, Руководство по эксплуатации

Страница: 166 / 296

166
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Code 93 Set Length 1
Specifies one of the barcode lengths for Code 93 Length Control on page 165 . Length 1 is the
minimum label length if in Variable Length: For variable length decoding, a minimum and maxi-
mum length may be set. on page 231 Mode, or the first fixed length if in Fixed Length: For fixed
length decoding, two different lengths may be set. on page 231 Mode. Length includes the bar-
code’s data characters only. The length can be set from 01 to 50 characters.
Table Code 93 Length 1 Setting Examples provides some examples for setting Length 1. See
page 232 for detailed instructions on setting this feature.
Code 93 Length
1 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 1 SETTING
4
Scan Two
Characters
From
Appendix
18, Use the
barcodes in this
appendix to enter
numbers as you
would select
digits/characters
from a keypad.
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L1
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character