Baldor VS1SM, Инструкция по установке и эксплуатации

Страница: 29 / 71

MN761 Parameter Descriptions 7-1
Chapter 7
Parameter Descriptions
7.1 Drive Group
Parameter # Access Parameter Name, Value Range, Description and Preset Value
RW Speed Reference (Range: 0.00 to 400.00 Hz) Must be less than F21.
The value of the speed reference command. The commanded speed
(frequency) is displayed even if the drive is not running.
Preset Value: 0.00
RW Acceleration Time (Range: 0-6000seconds)
Sets acceleration time.
During Preset Speed operation, serves as acceleration time 0.
Preset Value: 0
RW Deceleration Time (Range: 0-6000seconds)
Sets deceleration time.
During Preset Speed operation, serves as deceleration time 0.
Preset Value: 0
RW Start/Stop Source (Range:
0- Run/Stop by Run/Stop key on the keypad.
1- 2 or 3 wire control from the terminal strip.
2- 2 wire with direction control from the terminal strip.
3- Operation by Communication Option)
Sets the control mode to keypad, terminal strip, communication network.
Preset Value:
0.0
RW Speed Reference Source (Range:
0- Digital, by Keypad 1
1- Digital, by Keypad 2
2- Analog, by Keypad Potentiometer (V0)
3- Analog, by V1 Terminal
4- Analog, by I Terminal
5- Analog, by Keypad Potentiometer and I Terminal
6- Analog, by V1 Terminal and I Terminal
7- Analog, by Keypad Potentiometer and V1 Terminal
8- Analog, by Modbus-RTU Communication
Sets the speed reference source of the drive to be from the drive keypad or
a remote analog reference.
Preset Value: 0.00
RW Preset Speed 1 (Range: 0-400 Hz) Must be less than F21.
Sets Preset Speed 1 during operation. See also I30-I33.
Preset Value:
10.00
RW Preset Speed 2 (Range: 0-400 Hz) Must be less than F21.
Sets Preset Speed 2 during operation. See also I30-I33.
Preset Value:
20.00