Baldor VS1SM, Инструкция по установке и эксплуатации

Страница: 65 / 71

MN761 CE Guidelines C-1
Appendix C
CE Guidelines
C.1
CE Declaration of Conformity
Baldor indicates that the products are only components and not ready for immediate or instant use within
the meaning of “Safety law of appliance”, “EMC Law” or “Machine directive”.
The final mode of operation is defined only after installation into the user's equipment. It is the
responsibility of the user to verify compliance.
C.2
EMC - Conformity and CE - Marking
The information contained herein is for your guidance only and does not guarantee that the installation
will meet the requirements of the council directive 89/336/EEC.
The purpose of the EEC directives is to state a minimum technical requirement common to all the
member states within the European Union. In turn, these minimum technical requirements are intended
to enhance the levels of safety both directly and indirectly.
Council directive 89/336/EEC relating to Electro Magnetic Compliance (EMC) indicates that it is the
responsibility of the system integrator to ensure that the entire system complies with all relative directives
at the time of installing into service.
Motors and controls are used as components of a system, per the EMC directive. Hence all components,
installation of the components, interconnection between components, and shielding and grounding of the
system as a whole determines EMC compliance.
The CE mark does not inform the purchaser which directive the product complies with. It rests upon the
manufacturer or his authorized representative to ensure the item in question complies fully with all the
relative directives in force at the time of installing into service, in the same way as the system integrator
previously mentioned. Remember, it is the instructions of installation and use, coupled with the product,
that comply with the directive.
Wiring of Shielded (Screened) Cables
Conductive
Clamp
Remove the outer insulation to
expose the overall screen.
Shielded Couplings
360 Degree
Coupling
360 Degree Coupling
Conductive
360 degree Clamp