Baldor VS1SM, Инструкция по установке и эксплуатации

Страница: 32 / 71

7-4 Parameter Descriptions MN761
7.2 Function Group1
Continued
Parameter # Access Parameter Name, Value Range, Description and Preset Value
RW DC Brake Trigger (Range: 0.0-60 Hz)
Sets the frequency at which DC braking begins. Cannot be less than F23.
Preset Value:
5.00 Parameter is only displayed when F4 =1.
RW DC Brake Wait Time (Range: 0-60 sec)
Sets the delay before DC braking after F8 has been reached.
Preset Value:
0.1 Parameter is only displayed when F4 =1.
RW DC Brake Voltage (Range: 0-200%)
Sets DC Brake voltage.
Preset Value:
50 Parameter is only displayed when F4 =1.
RW DC Brake Time (Range: 0-60 sec)
Sets the time DC brake current is applied after the motor has stopped.
Preset Value:
1.0 Parameter is only displayed when F4 =1.
RW DC Brake Start Voltage (Range: 0-200%)
Sets the amount of DC brake voltage applied during brake before start.
Preset Value:
50
RW DC Brake Start Time (Range: 0-60 sec)
Sets the time DC braking is applied during brake before start.
Preset Value:
0
RW Time for Motor Magnetization (Range: 0-60 sec)
Sets the time current is applied to the motor before the motor begins
acceleration during Sensorless Vector control.
Preset Value: 1.0
RW Jog Speed (Range: 0-400Hz)
Sets the frequency for jog operation. Cannot be greater than F21.
Preset Value:
10.0
RW Maximum Speed (Range: 40-400Hz)
Sets the maximum motor speed the drive will output.
Acts as the speed reference for accel/decel.
Note: If H40 =3, the range is decreased to 40-300Hz.
See also: H70
Preset Value:
60.00
RW Base Speed (Range: 30-400Hz)
Sets the motor base speed, at which the rated output voltage is applied.
For a 60Hz motor, the base speed is 60Hz.
Preset Value: 60.00