Baldor VS1SM, Инструкция по установке и эксплуатации

Страница: 46 / 71

7-18 Parameter Descriptions MN761
7.3 Function Group2
Continued
Parameter # Access Parameter Name, Value Range, Description and Preset Value
RW Second Motor Stall Prevention Level (Range: 30-150%)
Sets the current level that activates stall prevention for the second motor
during Accel, Constant, or Decel. Set as a percentage of H90.
Preset Value: 150 Parameter is only displayed when a Digital Input
(I20-I24)=12
RW Second Motor 1 Minute Overload (Range: 50-200%)
Sets the maximum current level the motor can tolerate for 1 minute set as a
percentage of H90. Cannot be less than H89.
Preset Value: 150 Parameter is only displayed when a Digital Input
(I20-I24)=12
RW Second Motor Continuous Overload (Range: 50-150%)
Sets the maximum current level the motor can tolerate for continuous
operation set as a percentage of H90. Cannot be greater than H88.
Preset Value: 100 Parameter is only displayed when a Digital Input
(I20-I24)=12
RW Second Motor Rated Current (Range: 0.1-20A)
Sets the rated current for the second. See motor nameplate.
Preset Value:
1.8 Parameter is only displayed when a Digital Input
(I20-I24)=12
RW Factory Settings (Range:
0- None.
1- All parameter values are restored to factory settings.
2- Only Drive Group parameter values are restored to factory settings.
3- Only Function Group 1 parameter values are restored to factory settings.
4- Only Function Group 2 parameter values are restored to factory settings.
5- Only I/O Group parameter values are restored to factory settings.)
Initializes parameter values to factory settings.
Preset Value:
0
RW Password Registration (Range: 0-FFF)
Set password for H95.
Valid password is 3 hexadecimal characters (0-9, A, B, C, D, E, F).
Preset Value: 0
RW Parameter Lock and Unlock (Range: )
0- Unlocked Parameter changes allowed.
1- Locked Parameter changes NOT allowed.
Locks or Unlocks parameters by entering the password registered in H94.
Preset Value:
0