Baldor VS1SM, Инструкция по установке и эксплуатации

Страница: 21 / 71

MN761 Using the Keypad 6-1
Chapter 6
Using the Keypad
6.1 Keypad Overview
Operator controls are shown in Figure 6‐1 and described in Table 6‐1.
The 5 Way Button that is used for parameter setting is only accessible when the cover is removed.
Figure 6‐1 Operator Controls
Display
Stop/Reset Switch
Speed Adjustment
Potentiometer
Run Switch
FWD Run LED
REV Run LED
5 Way Button
(Must remove cover to access)
Table 6‐1 Key Descriptions
Item Description
FWD FWD Run LED:
On during Forward Run.
REV REV Run LED:
On during Reverse Run.
DISPLAY 7 Segment LED Display:
Displays operation status and parameter information.
RUN Run Switch:
Press to issue a run command.
STOP/RST Stop / Reset Switch:
STOP: Stop the operation RST: Reset faults
POTENTIO-
METER
Speed Adjustment Potentiometer:
Adjusts the value of run frequency.
5 WAY
BUTTON
5 Way Button: (Not visible with cover on.)
Y
Navigate parameter lists or increase parameter value.
B
Navigate parameter lists or decrease parameter value.
"
Navigate parameter groups or move cursor to the right to change the parameter value.
A
Navigate parameter groups or move a cursor to the left to change the parameter value.
F
Set the parameter value or save the changed parameter value (Enter).