Baldor ID15J1F50-ER, Инструкция по установке и эксплуатации

Страница: 63 / 89

5-4 Troubleshooting MN715J
How to Access the Fault Log
When a fault condition occurs, motor operation stops and a fault code is
displayed on the Keypad display. The control keeps a log of the last 31 faults.
If more than 31 faults have occurred, the oldest fault will be deleted from the
fault log. To access the fault log, perform the following procedure:
Action Description Display
Apply Power Display of mode & drive status.
Press DISP key Press DISP to scroll to the Fault Log
entry point.
Press ENTER key Display first fault type and time fault
occurred.
Press Y key Scroll through fault messages.
Press ENTER key Scroll to diagnostic info block.
Press RESET key Return to display mode.
How to Clear the Fault Log
Use the following procedure to clear the fault log.
Action Description Display
Apply Power Display of mode & drive status.
Press DISP key
several times
Scroll to diagnostic info block.
Press DISP key Press DISP to scroll to the Fault Log
entry point.
Press ENTER key Displays most recent message.
Press SHIFT key
Press RESET key
Press SHIFT key
Press ENTER key Fault log is cleared.