Owner’s Manual Baldertech Balder
| Baldertech 41
NOTE
We recommend that batteries to be discarded should be handed to a specialist center in order
to ensure that they are disposed of correctly.
NOTE
Only use the charger belonging to your wheelchair, and follow the user guide for the charger as
regards how the batteries are to be charged. The charging point is the same for both types of
joystick (Dolphin and Europa).
NOTE
There is no risk involved in leaving the charger connected to the wheelchair as long as the power
is switched on. This will ensure that the batteries are charged fully and will maintain their charge.
NOTE
With two red diodes at the battery indicator, the driving distance left is approx. 2 km. To avoid
battery damage, recharge the wheelchair when the indicator shows one red flashing led.
NOTE
No parts is to be repair by the intendent user.
When the batteries are to be charged
1. Check that the chair is switched off.
2. Connect the charger cable to the charger contact (1)
3. Connect the power supply cable to the mains.
When the batteries are fully charged
1. Disconnect the charger from the mains.
2. Disconnect the charger from the wheelchair (1)
8.2.2. FRAME AND BODY CLEANING
The chair is cleaned using mild soapy water as required.
8.2.3. SEAT CLEANING
Cleaned as required; cf. the cleaning instructions sewn onto the seat pads.
8.2.4. RELEASING THE SEAT
If the power to the chair is switched off and you need to
remove the chair body, the seat lift function can be released
manually.
1. Pull the lock pin (1) out to the side, and a gas spring on the
lifting arm will raise the seat unit. Bear in mind that this is a
strong spring which will react quickly when the lock pin is
removed. Place weight on the seat: this will allow the lock
pin to be loosened more easily.
2. Remove the cover using six body screws on the main cover
which covers all of the lower part of the wheelchair.
3. Lift off the main cover.
