34
Owner’s Manual Baldertech Balder
| Baldertech
6.2. Securing the chair in a car with a 4 point strap tie-down system
DANGER
Always make sure your chair is secured when you transport it. Always
ensure that the attaching equipment you are using is approved for
transporting your chair in a car.
To secure your chair during transportation, the fixing rings on the chair
must be used as the attachment points for straps.
NOTE
The illustrations show the Q-straint strap system.
Manual straps
1. Attach and tighten the front straps (1) to the attachment
points at the front of the wheelchair. There is one strap on
either side. This is done when the chair is in the correct
position.
2. Attach and tighten the rear straps (2) to the fixing ring (3) at
the back of the wheelchair.
3. Check that the straps are tightened properly so that the
chair does not move about.
4. Push down the locking catch to lock the chair in this posi
-
tion.
DANGER
When fitted, tie-down straps angles should fall within the preferred angles
shown below.
Preferred angles for front tie-down straps
Preferred angles for rear tie-down straps
