Owner’s Manual Baldertech Balder
| Baldertech 35
DANGER
Positioning the occupant restraint when using it with a 4 point strap tie-
down system:
The pelvic restraint belt must be worn low across the front of the pelvis so
that the angle of the pelvic belt is within the optional or preferred zone of
30° to 75° to the horizontal. A steeper (greater) angle within the preferred
zone, 45° to 75°is desirable i.e. closer to, but never exceeding 75° degrees.
Preferred and optional angles for location of the lap belt
6.3. Using a docking system (optional extra)
DANGER
The clamp down unit must be fitted by an approved installer and adjusted
to suit the wheelchair in accordance with the description of fitting.
WARNING
Do not move the vehicle:
•
Whilst the wheelchair is being maneuvered into position in the docking
station.
•
If the wheelchair and user are not correctly secured.
•
If there are indications that the clamp down is not functioning normally.
•
Before the user’s seat belt is secured and tightened.