42
Owner’s Manual Baldertech Balder
| Baldertech
8.2.5. DISCONNECTING THE BATTERIES
1. Check that the chair is switched off.
2. Remove the battery shoes and isolate these so that they
cannot come into physical contact with the battery poles
(see the illustration).
3. Place the battery shoes in the cavity behind the batteries.
To get access to the batteries remove the cover. Release the
cover by turn Dsuz against the clock.
Lift of cover. Remove batteries.
8.2.6. FITTING THE BATTERIES
1. Connecting the power: follow the instructions for removal, but in reverse order.
2. Fit the main cover.
3. Press the seat unit down while guiding the seat raise motor into the attachment device.
4. Check that the levers for disconnecting the drive motors are in Operation position. These are
marked Operation – Disconnected.
5. Switch on the chair using the on/off switch on the control panel, then check that all the elec
-
trical functions work.
8.2.7. TIRE
Your Balder is fitted with either ordinary air-filled tires or puncture-free compact tires. Even with
compact tires, it is sensible to ensure that these are not worn or damaged to an unreasonable
extent.
