Owner’s Manual Baldertech Balder
| Baldertech 15
WARNING
Driving characteristics of an electric wheelchair can be affected by
electromagnetic fields (mobile phones or other devices that emit
electromagnetic noise). If possible, should such devices be turned off while
the chair is in drive mode.
Charging socket can only be used to charge and lock the wheelchair.
Outlet must not be used as a power source for any other electrical
equipment.
3.2.2. OPERATING PROGRAM
This chair is preprogrammed with five different default operating programs. The illuminated dis
-
play shows the program or function that you are using.
The operating program is selected by pressing the program selector
switch.
The various operating programs are as follows:
1. An operating program in which emphasis is placed on quiet movements and low speed, a
typical program which can be used where there is not much space and precise movement is
important.
2. An operating program very like program 1, but with slightly faster reactions to joystick move
-
ments.
3. An operating program defined according to average values. This program is ideal the first time
you use the chair.
4. Programs which are intended to be used as standard once you have learned how the chair
reacts and feel secure in all situations. This program is created to allow rapid feedback to
your control operations, maximum speed and rapid application of the motor brake.
5. This program is designed for outdoor operation and gives maximum forward propulsion with
-
out being too sensitive to minor corrections.
3.2.3. WHEELCHAIR ATTACHMENT POINTS
There are attachments on the wheelchair – 2 in front (1) and 1 ring (2) at the rear. These are indi
-
cated by means of symbols as shown in the illustration.
In Front
Back
For securing the wheelchair during transportation, see section 6.
