Owner’s Manual Baldertech Balder
| Baldertech 19
4.1.3. ADJUSTING THE ARMREST PADS
Balder Finesse
1. Undo the screws (1) so that the pad is loosened from the
fixing bracket.
2. Push the pad into the required position.
3. Tighten the screws (1).
Balder Junior
1. Undo the screws (1) so that the cushion is loosened from
the fixing bracket.
2. Push the pad into the required position.
3. Tighten the screws (1).
4.1.4. ADJUSTING THE WIDTH BETWEEN THE ARMRESTS
NOTE
Balder Junior only.
Balder Junior
1. Loosen the locking screw (1).
2. Adjust the bracket (2) which holds the armrest at the
required width.
3. Tighten the locking screw (1).
4. Do the same for the other armrest.
4.2. Adapting the footrest / foot supports
All Balder chairs can be supplied with different types of footrest, both manual and electric. The
type of footrest selected is dependent on – among other things – what other equipment or func
-
tions the chair has. See the description for the type of footrest with which your chair is fitted.
Adjustment is best carried out with the knee at an angle of 90 degrees, as this will give the most
correct relationship between the length and angle of the footrest.
