36
Owner’s Manual Baldertech Balder
| Baldertech
6.3.1. DAHL DOCKING SYSTEM
Compatible with Docking Station MKII and VarioDock, see fitting instructions for more details.
WARNING
Do not move vehicles until the wheelchair is in the correct position, this is
indicated by a green light in the control panel of the car.
NOTE
Always check if the lock plate is properly engaged in the docking station by trying to reverse the
wheel chair out of the docking station before moving the vehicle. (It must not be possible to
reverse out of the docking station without pressing the red release button in the control panel).
Attaching the chair to the docking station
1. Manoeuvre the wheelchair slowly and in a uniform direc
-
tion over the docking station (1). The lock plate (2) under the
wheelchair helps to guide the wheelchair into place in the
docking station. When the lock plate is fully engaged in the
docking station, a spring-action locking pin (3) automatically
secures the lock plate.
2. The docking station is equipped with a control switch that
indicates whether the lock plate is correctly secured in the
docking station. As soon as the lock plate comes into con
-
tact with the locking pin, a warning tone will sound (a high-
pitched howl), and the red lamp (4) in the control panel will
light up until the lock plate is either fully engaged or else
the wheelchair is removed from the docking station.
3. As an indication that the wheelchair is properly secured, the
warning tone will cease, the red lamp in the control panel
will go out and the green lamp (5) will light up.
Removing the chair from the docking station
1. To unlock commence by driving the wheelchair forward
to release pressure on the lock pin.
2. Press the red release button (6) in the control panel. The
locking pin will be triggered/ released for approx. 5 sec
-
onds, after which the locking pin is automatically locked/
activated again.
3. Move the wheelchair away from the docking station with
-
in this 5-second period. Do not attempt to reverse out
of the docking station until the red lamp on the control
module, which indicate the unlock position, has been
illuminated.
WARNING
Attempting to reverse the wheelchair before the red LED has been illu
-
minated will result in blocking the docking stations locking mechanism,
which makes it impossible to reverse. If this happens repeat above unlock
-
ing procedure.
