baldertech BALDER Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

baldertech BALDER Скачать руководство пользователя страница 31

Owner’s Manual Baldertech Balder

| Baldertech 31

DANGER

Do not use any other devices in combination with the power chair. Ex.

charging the batteries, mobile, laptop etc.

5.4.1. CHECKING THE AUTOMATIC FUSE

The main circuit switch/fuse is located behind a cover at the right side of the chassis. It is
marked with circuit switch/main fuse and a voltage symbol. By sliding the cover (see picture) you
will have access to the fuse/breaker.

Junior and Finesse

Push the lever up to engage. Press the switch to disconnect.

5.4.2. DISCONNECTING THE BREAKS/DRIVE MOTOR

DANGER

The chair must not be disconnected on slope, as this may cause it to roll

away!

NOTE

The chair should be switched off when disconnecting the breaks/drive motors.

If you need to move the chair without using the electronics, the breaks/drive motors have to be

disconnected.

Junior and Finesse

The disconnection switches are located at the front of the

wheelchair.

1

Disconnect: Move the two switches (1) down until they lock in position.
Connect for operation: Move the two switches (1) up until they lock in position.

WARNING

Do not leave the wheelchair in unlocked position with the occupant

seated.

«
...
29
30
31
32
33
...
»

Содержание BALDER

















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды