20
Owner’s Manual Baldertech Balder
| Baldertech
4.2.1. LENGTH ADJUSTMENT, ELECTRIC FOOTRESTS
Electric footrests
1. Loosen the setting screws (1) at the back of the brackets
for footrest plates.
2. Adjust to the required height.
3. Tighten the setting screws (1).
4. Test the footrest function once the footrests have been
adjusted by moving them to their outermost positions.
The illustration shows a footrest with electric tilt and length
compensation, but this procedure is the same for all electric
footrests.
Manual footrests
1. Remove the locking screw (1).
2. Adjust the lower part of the footrest to the desired posi
-
tion.
3. Replace the locking screw (1)
4. Repeat the same procedure for the other footrest.
4.2.2. ANGLING THE FOOTREST PLATES
Electric footrests
1. Loosen the nuts (1).
2. Turn the adjusting screw (2) counterclockwise for a
steeper angle, or clockwise for a less steep angle.
3. Tighten the nut (1).
