Bad Boy 5' Cutter, Руководство по эксплуатации для владельца

Страница: 25 / 28

PAGE 25
DEALER’S CHECKLISTS
PRE-DELIVERY CHECK LIST
■
IMPORTANT- The gearbox was not filled with gear oil at the factory. It must be filled before the cutter
can be placed into service (see Lubrication, pg. 14). Failure to fill the gearbox with the proper quantity
of gear oil will result in damage to the gearbox.
It is the dealer’s responsibility to fully assemble and inspect the cutter before the customer takes delivery of
the unit. The following check list is provided as a memory aid to ensure all points are inspected. Check off the
items below as they are completed.
____ Check the torque of all bolts to be sure they meet the values given in the Fastener Torque Chart (pg. 24).
____ Check that both cotter pins are properly secured.
____ Check the PTO shaft for proper installation.
____ Check that the gearbox is properly filled with gear oil and that no seals are leaking.
____ Grease all lubrication points as shown in Lubrication (pgs. 14-15).
____ Check that blades have been properly installed. The cutting edge should lead in a counterclockwise
motion when viewed from above.
DELIVERY CHECKLIST
____ Explain the importance of periodic inspections and lubrication to the customer.
____ Present the Owner’s Manual to the customer and request that the customer and all other users read the
material before operation. Explain the importance of the safety rules.
____ Explain the importance of front ballasts. This unit weighs 650 pounds; the customer needs to weigh the
tractor and equipment to ensure at least 20% of the total weight is on the tractor’s front wheels.
____ Explain that if the unit is transported on or along a roadway, safety devices (such as reflector decals)
should be utilized in order to alert motorists of the equipment’s presence.