PAGE 17
DRIVELINE SHEAR-BOLT REPLACEMENT
■
Always use a 1/2˝ x 3-1/4˝ SAE grade 2 bolt as a replacement part. Using a hardened bolt (such as
grade 5 or grade 8) may result in damage to driveline or gearbox.
1. Slide the driveline bell shield (covers the U-joint of the PTO shaft and input shaft of gearbox) back along
the driveline guard. This is accomplished by depressing the 3 tabs (just inside the holes provided) at
the base of the bell and sliding the bell shield back over the cylindrical guard.
2. Remove the damaged shear bolt.
3. Rotate the driveline to align the holes in the yoke with the hole in the input shaft of the gearbox. Install
shear bolt and secure with nylock nut.
4. Ensure that the retaining ring is set properly in the groove on the input shaft of the gearbox.
5. Slide the bell shield back over the three tabs at its base, ensuring that the tabs snap back into position.
SHIELDING REPAIR
DANGER
■
This machine is equipped with front and rear guards.
■
DO NOT
operate the machine without the guards in place.
Rubber Shielding
Inspect rubber shielding each day of operation and replace if bent, cracked or broken.
Chain Shielding
Inspect chain shielding each day of operation and replace any broken or missing chains as required.
CLEANING
After Each Use
■
Remove large debris (clumps of dirt, grass, crop residue, etc.) from machine.
■
Inspect machine and replace worn or damaged parts.
■
Replace any missing, damaged, or otherwise unreadable safety decals.
Periodically or Before Extended Storage
■
Clean large debris (clumps of dirt, grass, crop residue, etc.) from machine.
■
Remove the remainder using a low-pressure water spray.
1. Take extra care when spraying near safety decals. The water spray could penetrate under the
decal and peel it off.
2. Be careful when spraying near any paint damage. The spray could remove more paint.
Содержание 5' Cutter
Страница 1: ...OWNER S OPERATION PARTSMANUAL 10 28 2014...
Страница 19: ...PAGE 19 CUTTER ASSEMBLY AND PART LIST...
Страница 20: ...PAGE 20...
Страница 28: ...PAGE 28 102 Industrial Drive Batesville Arkansas 72501 870 698 0090...