Rotary Cutters, Folding Deck
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
74
RCR3515 & RCRM3515 Models
Features
Benefits
Surpassed rugged
industry standards
All Land Pride
Rotary Cutters
have been designed and tested and meet rigorous
voluntary testing procedures specified by ANSI.
Mostly factory assembled
Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
5 Year gearbox warranty
Shows confidence in gearbox integrity.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
160 HP splitter gearbox
High gearbox rating for handling jobs suited for this Rotary Cutter.
110 HP center & wing gearboxes
High gearbox rating for 2" cutting capacity.
540 or 1000 RPM PTO speed
Fits wide variety of tractors in the 50 to 160 HP range.
4 Gearboxes vs. 3
Spreads overall weight out and evenly disburses horsepower to each spindle.
Low tongue weight
Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow tongue construction
Allows for a tighter turning radius.
Round back design
Allows for more efficient handling and dispersing of material.
Input Driveline: Cat. 5 CV
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Wing driveline:
Cat. 4 with slip-clutch
Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline. (Optional Cat. 5 driveline is available.)
Slip-clutch drivelines
Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
High Blade tip speed
(See Specifications for actual FPM)
Allows clean cutting of material.
6” Blade overlap
Eliminates skipping during turns.
Left wing rotates clockwise
Better discharge of material. Picks up tractor tracks.
2” to 14” Cutting Height
Cover a wide range of cutting conditions.
3/16” Round stump jumper
Standard thick stump jumper material keeps damage to a minimum.
1/4” Sidewall thickness
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Replaceable skid shoes
Skid shoes protect deck in uneven terrain. Can be easily replaced if damaged or worn
out.
Self-leveling hitch
Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections
Allows
cutter
to follow terrain. Ideal for rough ground where hillsides, ditches and
hollows can cause uneven cutting.
1” Solid hinge rods
Larger diameter hinge rod gives greater strength to the
cutter
from front to rear, and in
the hinge area itself.
Wing transport locks
Wing transport locks securely hold the wings in the folded position in case of hydraulic
failure.
Enclosed front to rear dual leveling
rods
Dual leveling rods enable the
cutter
to pull equally on the rear axle during travel over
rough terrain.
5-Bolt hubs
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
4 or 6 Wheels
Choice of laminated tires for eliminating flats, used aircraft tires for cushioning during
field and road use or bare rims for suppling your own automotive tires.
Spring cushioned center-axle
Protects unit from bumps and ground shock.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle
assembly.
318-301F continue on next page
6/28/11
