Baby Lock BLDY Скачать руководство пользователя страница 97

Страница: 97 / 311

Basic of Assembly

2 - 71

Main frame and covers

Basic of Assembly

Attachment of Free arm front cover assy, Free arm cover and Needle plate B assy

1. Set the free arm front cover, hang the two hooks A on the front cover assy and hook B on the hook tray,

then attach the free arm front cover assy to the machine with the screw (screw, pan (T washer) M3x6)

and screw (screw, bind M3x6).

2. Attach the free arm cover to the machine with the screw (screw, bind M4x6).
3. Attach the needle plate B assy to the machine.



Refer to 3 - 147 Assembly of Needle plate B assy.

Screw, Bind M4X6

Screw, Pan (T washer) M3X6

Screw, Bind M3X6

Screw, bind M3x6

Needle plate B assy

Free arm front cover assy

Screw, pan (T washer) M3x6

Free arm cover

Screw, bind M4x6

Hook B

Hooks A

Hook tray

Front cover assy

Содержание BLDY
























































































































































































































































































































Результаты поиска

Содержание BLDY

Отзывы:

Baby Lock BLDY, Руководство по обслуживанию, Страница: 97 / 311

Результаты поиска

Содержание BLDY

Отзывы: