manualshive.com logo in svg

Baby Lock BLDY, Руководство по обслуживанию, Страница: 95 / 311

Поделиться
Скачать
Baby Lock BLDY Скачать руководство пользователя страница 95

Basic of Assembly

2 - 69

Main frame and covers

Basic of  Assembly

Basic of  Assembly

8 

Attachment of Belt cover

1. Set the belt cover lower assy to the main body, and hang the each hook on the each cover and the

base plate.

2. Secure the belt cover lower assy with the two screws (screw, bind M4x6).

Refer to 3 - 146 Assembly of Belt cover lower assy.

3. Set the belt cover to the main body, and hang the each hook on the each cover.
4. Secure the belt cover with the screw (screw, pan (S/P washer) M4x10) and two screws (screw, bind

M4x6).

5. Attach the screw cover to the belt cover, and attach the two screw caps to the bobbin winder unit cover.

Refer to 3 - 146 Assembly of Belt cover assy.

Screw, Bind M4X6

Screw, Pan (S/P washer) M4X10

Belt cover

Screw, bind M4x6

Screw, bind M4x6

Screw cap

Hooks

Hooks

Screw cover

Hook

Screw, bind M4x6

Screw, pan 
(S/P washer) 
M4x10

Base plate

Bobbin winder 
unit cover

Hooks

Belt cover lower assy

Hooks

Hooks

Screw cap

Содержание BLDY
























































































































































































































































































































Отзывы:

Нет отзывов