Baby Lock BLDY Скачать руководство пользователя страница 79

Страница: 79 / 311

Basic of Assembly

2 - 53

Needle threading mechanism

Basic of Assembly

Attachment of Thread unit assy

1. Attach the thread unit assy to the arm bed with two screws (screw, bind M4x8).



Refer to 3 - 112 Needle threading mechanism.

2. Align the boss of front cover fixed plate with the positioning hole of thread unit assy, and attach the front

cover fixed plate to the thread unit assy with the screw (screw, bind M4x8).

3. Pass the each lead wire of thread unit assy through the securing fixtures.

*Key point

• Refer to

"Wiring of Thread unit"

Screw, Bind M4X8

Screw, bind M4x8

Thread unit assy

Front cover fixed plate

Screw, bind M4x8

Содержание BLDY
























































































































































































































































































































Результаты поиска

Содержание BLDY

Отзывы:

Baby Lock BLDY, Руководство по обслуживанию, Страница: 79 / 311

Результаты поиска

Содержание BLDY

Отзывы: