Baby Lock BLDY Скачать руководство пользователя страница 93

Страница: 93 / 311

Basic of Assembly

2 - 67

Main frame and covers

Basic of Assembly

Attachment of Front cover assy

1. Connect the lead wire assy main-panel to the main PCB assy. Connect the lead wire assy camera relay

to the panel PCB assy, and lock it.

2. Set the front cover assy to the arm bed, hang the hook A (front cover side) and B (rear cover side) to

the hook tray C (rear cover side) and D (front cover side) respectively, and hang the three hooks E to

the base plate.

*Key point

• Be careful not to get each lead wire caught in the front cover and rear cover.

3. Secure the front cover assy to the arm bed with the screw (screw, pan (T washer) M3x6) and two

screws (screw, bind M4x6).



Refer to 3 - 136 Assembly of Front cover assy.

Screw, Pan (T washer) M3X6

Screw, Bind M4X6

Screw, bind M4x6

Front cover assy

Main PCB assy

Screw, pan (T washer) M3x6

Screw, pan
(T washer) M3x6

Hook B

Base plate

Hook A

Lead wire assy main-panel

Hooks E

Hook tray C

Screw, bind
M4x6

Hook
tray D

Lead wire assy
camera relay

Содержание BLDY
























































































































































































































































































































Результаты поиска

Содержание BLDY

Отзывы:

Baby Lock BLDY, Руководство по обслуживанию, Страница: 93 / 311

Результаты поиска

Содержание BLDY

Отзывы: