4
FIXING MRL CONTROLLER BOX TO THE WALL
The controller box is for hanging on the wall.
There must be at least 150 mm free space above
and below the box.
This is required for air circulation to cool the
electronic parts inside.
Determine the place of the box regarding to the
free space requirements.
Be sure that there is no possibility to drop water or
any liquid onto the device
.
You should use the wall hanger to hang the box.
Therefore, the wall hanger must be fixed on the wall firstly.
The distance from the center of the screws in the wall
hanger to the top level of the box should be 57mm.
So, fix the wall hanger onto the wall regarding to the
distance between the wall hanger screw level and top of
the box being as 57 mm.
After hanging the box on the Wall hanger,
you should fix the inner plate onto the
Wall with a screw.
