15
TUNING IN OPERATION
Turn on INSPECTION switch on recall command box to INSP position from inside the device.
The system must stay in inspection mode and safety line must be closed along the operation to
execute tuning process.
To start tuning operation, select 1-START TUNING under the G06.
The car must not be staying at bottom or at top floor. Move it anywhere not close to the ends of the
shaft.
Operation Stage 1
Press UP and DOWN buttons both on the
recall command box and hold them pressed
until the end of the tuning process.
And press UP button on the keypad to start
the operation.
Operation Stage 2
So, tuning operation has been started.
-
