12
1.
The device must be started in inspection mode due to the position of the switch in recall
command box.
2.
Switch on power to energize the controller.
The main screen shows the following values about the
lift:
Real time travel of the car.
Safety line.
Car position
Car speed
Door state
Current calls
A message line about the state of the lift.
For a detailed discussion of using LCD screen
read Chapter 3 in user manual
Press ENT button to go to the menu.
In order to enter into an application or sub-menu
come to the related icon by using cursor keys on
the screen and press ENT when its icon is
highlighted.
For example, select Parameters and press ENT
while parameter icon is being highlighted.
So, you will go into parameter menu.
INITIAL PARAMETER SETUP
AE-SMART has an interactive installation menu which can be used to set most of the general
parameters.
Using this menu facilitates setting up the system.
You will be asked to set requested parameters one by one depending on the previous selections.
Firstly, switch to the INSPECTION mode.
In Parameters menu select G05-EASY INSTALLATION
by using up and down arrows and press ENT when G05
is highlighted.
You can select other parameter groups similarly.
