AVT MAGIC ISDN, Описание аппаратуры

Страница: 18 / 66

PAGE 18
Q U I C K I N T R O D U C T I O N
1.2.4 Setting up a manually dialled call
1.2.5 General advice on dialing using the Display and Keypad
(1) The exchange line number can only be entered using the PC software
(important only for PABXs).
1
(2) When a direct line is used, the prefix number to obtain an exchange line
through a PABX can be suppressed if the calling number is preceeded
with a “-” sign. This is important if the call is to be set up within the
PABX. The minus sign should only be added to the first number. This
display can be reached when entering the calling number, by pressing
the
key.
(3) The setting up of the charging factor and the currency for a charge unit
is also only possible using the PC software.
1
(4) All calling numbers can be entered by the PC software and transferred
afterwards to the MAGIC ISDN System.
Keys Display Remarks
Main menu Starting point. If another menu is displayed,
press the Escape key
to call up the main
menu.
Press the “down” cursor key to display the
CALL submenu.
With the “right” cursor key, select the
MAN(ual) menu item.
Press the “down” cursor key to display the
MAN(ual) submenu.
With the “right” cursor key, select the 128k
menu item (for a 2B channel connection).
The entry of the number is requested by pres-
sing Enter.
bis
Using the keys 0 to 9, enter the required num-
ber complete with country and/or area code.
Confirm the number with Enter. The connec-
tion will be set up immediately.
The remote end must also be operational and have the factory settings loaded.
Check the connection
In the second line of the display, Connect 2B
should appear.
Transmit the signal
Start the audio signal sources and sinks at both ends of the transmission route.
Disconnect the call
Starting point. If another menu is displayed,
press the Escape key
to call up the main
menu.
Press the “right” cursor key to select the DISC
menu item.
Confirm with the Enter key.
The connection is cleared down.
1 This can also be done REMOTELY by our Service, in case PC Software is not to hand.
*CALL RD DIS CFG SYS MEM
Call menu
*NAME MAN CONN SET ANSW
Call by name
NAME *MAN CONN SET ANSW
Manual call
*TEL 64k 128k
Telephone call
TEL 64k *128k
128kbit data call
Enter phone number:
0 9
Enter phone number:
09119952705
TEL 64k *128k
Connect 2B
CALL RD *DIS CFG SYS MEM
Disconnect line