AVT MAGIC ISDN, Описание аппаратуры

Страница: 43 / 66

PA G E 4 3
O P E R A T I O N W I T H T H E O P E R A T O R P A N E L
4.4 Entering the commands
To set a function, search for the corresponding menu in the menu tree (dis-
played diagrammatically from page 4-47 to page 4.51) and call up the function
using the cursor keys provided on the keypad. Make the setting and confirm
with Return. The following two sections contain examples of operator panel
entry.
4.5 Programming example: Storing calling numbers
Keys Display Remarks
Main menu This is the starting point of the menu tree.
To obtain this menu from any other
menu, press the escape key
.
Activate the CALL submenu by pressing
the „down“ curosr key.
With the „right“ cursor key, select the
SET menu item.
Press the „down“ cursor key to call up the
SET submenu.
Call up the NRS submenu by pressing
the „down“ cursor key
)
Mark the required service with the „right“/
„left“ cursor keys:
DATA: Call with data service indicator
(SI)(Default 1..6B)
TEL: Call withTelephone SI (1B)
Press the „down“ cursor key to select the
DATA submenu.
Entering the Country Code and the Local Area Code
Call up the AREA submenu with the
Enter key.
bis
Enter the country code and/or the local
area code with the keys 0 to 9.
Confirm with the Enter key. The NRS
submenu is then automatically called up.
Entering the calling number
( )
Use the „right“ / „left“ cursor keys to sel-
ect the required number N1 to N6. Call
up the submenu with Enter.
*CALL RD DIS CFG SYS MEM
Call menu
*NAME MAN CONN SET ANSW
Call by name
NAME MAN CONN *SET ANSW
Set call-by-name memory
*NRS MODE SAVE ERASE
Set call numbers
*DATA TEL
Set data call
*AREA N1 N2 N3 N4 N5 N6
Area code
Enter area code:
0911
0 9
*AREA N1 N2 N3 N4 N5 N6
Area code
Enter phone number:
9952705