AVT MAGIC ISDN, Описание аппаратуры

Страница: 14 / 66

PAGE 14
Q U I C K I N T R O D U C T I O N
(8) Check the connection: The MAIN panel appears on the screen. The
status of the interfaces and the dialled number is displayed here (CON-
NECT = connection made) and the number dialled.
Transmit signal
Start the audio signal sources and sinks at both ends of the transmission path.
Disconnect the call
Click the word DISC! in the top line of the screen. The call is cleared down.
1.1.4 General advice on dialing using the PC software
(1) When a direct line is used, the prefix number to obtain an exchange line
through a PABX can be suppressed if the calling number is preceeded
with a “-” sign. This is important if the call is to be set up within the
PABX. The minus sign should only be added to the first number. This
display can be reached when entering the calling number, by pressing
the
key.
(2) If you want to set up a normal telephone connection, it must be ensured
that this is done using the so-called Telephone Service Indicator. The
selection of the Telephone Service Indicator occurs when a “T” sign is
added before the first entered calling number. Without the “T” sign the
“Data” Service Indicator is always dialled.