Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 56 / 194

Configuring the Command Server
56
3. Enter the name of the workgroup and click OK. It will appear in the Workgroup section of the
Avid Workgroup Properties window.
4. Click the Add button under the Lookup services section (above the Apply button).
The Add Lookup Service dialog box will open.
5. Enter the full domain name of the current server, such as:
cmdsvr1.avidbroadcast.com
.
6. Leave the port setting as is.
7. Select the Expected check box.
8. Click OK.
9. Repeat steps 4 - 8 to add any other Command Server that is running the Lookup service.
10. Click OK on the Avid Workgroup Properties window.
11. Click Yes, when prompted to restart all services.
Configuring AirSpeed Device Services
After any device service is installed for Avid AirSpeed video servers, some additional configuration
is required, using the Avid Service Configuration and Avid Workgroup Properties applications of
Avid Service Framework. For more information, see the
Avid Service Framework User’s Guide .
To configure the AirSpeed device services:
1. Click the Start button, and then select All Programs > Avid > Service Framework > Avid Service
Configuration.
2. On the Hosts tab, navigate to and select the AirSpeed Device Service.
3. When prompted, enter the system administrator password and click OK. If you have not yet
created one, leave the space blank and click OK.
4. On the Device Settings tab, enter the device name for the respective device.