Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 140 / 194

Programming the X-keys
140
7. Enter the administrator password and click OK.
Programming the X-keys
The following procedure should be conducted at the Command Workstation to which the
X-keys USB keypad is installed.
To program the X-keys from the Command Workstation:
1. Select Tools > Options.
2. In Category, expand Actions and select X-keys.
3. Select Enable X-keys.
4. Set the de-bounce period. Designed to avoid inadvertent repetition, this is the span of time (in
milliseconds) during which the system should ignore duplicated signals.
n
If you find that you are having problems with “double-hits” when you press a key, increase the de-
bounce period.
5. Select the tab corresponding to the type of keypad you have.
6. Click on a gray box that represents (or corresponds to) the key on the keypad.