Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 36 / 194

Configuring the Command Server
36
To configure the Time Synchronization service:
1. Click the Start button, and then select All Programs > Avid > Service Framework > Avid Service
Configuration.
2. On the Hosts tab, navigate to and select the Avid Time Synchronization Service.
3. When prompted, enter the system administrator password and click OK. If you have not yet
created one, leave the space blank and click OK.
4. Select the Master Mode check box.
5. Select the Get Time Sync reference from an NTP Server check box and enter the name of that
server on your system.
6. Click Apply.
n
After you configure the Time Synchronization service on the primary Command Server, you will need
to install the service on all other Command Servers, workstations and devices, which will be in Slave
Mode by default.
Configuring Avid Video Device Services (VDS)
The Command user interface lets you integrate with some third-party video devices via the network
or via Video Disk Control Protocol (VDCP). For this integration to work, however, some
configuration of the device service is required, which varies depending on the type of integration.
The following sections contain information related to Command integration with Omneon or Harris
devices, as well as others that use VDCP.
Because VDCP does not support metadata, all of the information (item slug, date, etc.) is stored
within the Command system.
• Command sets the Last Modified date to the date that the item first appears in Command.
• Command lets users edit the item’s slug.
• If the item’s slug is blank, Command copies the item’s ID to the Slug field.