91
CHAPTER 6
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block represent the
day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a week, select the recording
mode and click the
button. If you want to only record at a particular time or day, click
Schedule
button and
select the
Recording Mode
, and then click on the time or day blocks. When the system starts recording a red
triangle mark would appear at the upper left corner of the screen.
The recording modes are listed below:
-
Always Recording
Record the video from the selected camera and save it to the designated storage path
-
Motion Recording
Start recording the video from the selected camera only when the system detects movement. Once a
motion is detected, the system automatically saves the previous frames and stop based on the
Start
Record Prior
and
Stop Record After
settings.
-
Smart Recording
Automatically switch to recorded at the maximum frame rate once a motion is detected and if there is no
motion, it records key frame only.
-
No Recording
The system
won’t do any recording.
(3) Motion Detection
Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is detected. When it
detects a motion, a green triangle mark would appear at the upper left corner of the screen.
