51
CHAPTER 3
-
Mask:
It is a bitmask used to identify the sub network and how many bits provide room for host
addresses. Enter the subnet mask of the IP address which user has assigned to DVR system.
-
Gateway:
A network device acts as a passageway to internet. Enter the network gateway IP address
-
DNS:
Domain Name Server translates domain names (such as www.abb.com.tw) to IP addresses.
Enter the IP address of DNS if it is available.
-
MAC Address:
An identifier hardware address of DVR unit that is assigned by the manufacturer for
identification. User don
’t need to fill in, it will generated by system automatically.
Obtain an IP automatically (DHCP):
Assign the IP address by local DHCP server to DVR system.
PPPOE:
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in
Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service connecting
to internet, and then, select PPPOE mode. Enter
User ID
and
Password
that is given by your ISP for
PPPOE connecting authority.
DDNS:
DDNS(Dynamic Domain Name Service) is a data query service mainly used on the Internet for
translating domain names into Internet addresses. Users can register their own domain name on
http://ddns.avers.com.tw
or
http://dyndns.org
(See
Appendix A
).
-
Domain Name
Enter the domain name that user has registered.
-
Password
A password use to access DDNS that user has setup when register the domain name
-
DDNS Server Name
Select the DDNS server that user applied their domain name.
-
DDNS Server Port
Fill in the port that connects to DDNS server. Default is 1053.
(4) Remote Upgrade Configuration
A port is using for the remote firmware upgrade through network.
(5) PCViewer Configuration
Activate
Enable Anonymous Login
to remotely access the DVR server without the need of password. Fill in
the
PCViewer PORT
for remote accessing connection.
(6) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the
Time Server
IP address or domain name
and select the
Time Zone
. User can enable
Automatic Synchronize
at
to set automatic synchronize time on
a daily basis. Or, user can click
Synchronize Time Right Now
to adjust time right away.
(7) Other Configuration
-
Network Video Stream
It displays the remote video stream value that is depended on the video quality user has selected on
remote site.
-
UPnP
Enable UPnP function to automatically map the port setting of PCViewer to the router on the local
network. This function is available when the router has enabled the UPNP function.
Assign a port on DVR as an UPnP protocol port. The
PCViewer Port
is displayed the current
PCViewer port number.
