manualshive.com logo in svg

Avaya Secure Router 2330, Установка оборудования

Поделиться
Скачать
Avaya Secure Router 2330 Скачать руководство пользователя страница 68

Average time to install or replace one power supply module: 1 minute.

 Caution:

Risk of equipment damage

Watch the power supply status LED for alerts if you hot swap a power supply module.

 Electrostatic alert:

ESD

To prevent damage from electrostatic discharge, always wear an antistatic wrist strap

connected to an ESD jack when performing maintenance on a Secure Router 4134. Ensure

that the wrist strap makes contact with your skin.

Prerequisites

• Ensure you have the power supply module for the Secure Router 4134.
• Ensure you have a Phillips #2 screwdriver.

Procedure steps to install a power supply unit

1. Use a Phillips screwdriver to loosen the two screws that secure the metal plate that

covers the slot in which you want to install the power supply unit.

2. Remove the cover plate.
3. Insert the new power supply unit in the power supply slot.
4. Push the power supply unit gently, but firmly, to insert it fully into the internal

connection port. When the power supply is fully inserted, the front of the power

supply unit is flush with the rear panel of the router.

5. Secure the power supply in the chassis by tightening the two retaining screws.

Procedure steps to replace a power supply unit

1. Use a Phillips screwdriver to loosen the two screws that secure the power supply

unit that you must replace.

2. Grasp the handle on the power supply unit.
3. Pull the power supply unit from the slot.
4. Place the power supply unit on antistatic material.
5. Insert the replacement power supply unit in the power supply slot.
6. Push the power supply unit gently, but firmly, to insert it fully into the internal

connection port. When the power supply is fully inserted, the front of the power

supply unit is flush with the rear panel of the router.

7. Secure the power supply in the chassis by tightening the two retaining screws.

Installing Avaya Secure Router 2330/4134 hardware components

68     Installation — Hardware Components

August 2013

Comments? [email protected]

Содержание Secure Router 2330































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды