Avaya J129 Скачать руководство пользователя страница 95

Страница: 95 / 133

Parameter name

Default value

Description

Note:

Set the parameter to 0 for IP Office
environment.

DISPLAY_SSL_VERSION

Specifies whether OpenSSL and OpenSSH
versions are displayed in the

Administration

menu.

Value Operation:

• 0: OpenSSL and OpenSSH versions are not

displayed.

• 1: OpenSSL and OpenSSH versions are

displayed.

DNSSRVR

Domain Name Server for Access Profile 2

DOMAIN

Null

Specifies a character string that will be appended
to parameter values that are specified as DNS
names, before the name is resolved.

The value can contain 0 to 255 characters. The
default value is null.

DOT1X

Specifies the 802.1X pass-through operating
mode.

Pass-through is the forwarding of EAPOL frames
between the phone's ethernet line interface and its
secondary (PC) ethernet interface

Value Operation:

• 0: EAPOL multicast pass-through enabled

without proxy logoff.

• 1: EAPOL multicast pass-through enabled with

proxy logoff.

• 2: EAPOL multicast pass-through disabled.

DOT1XEAPS

MD5

Specifies the authentication method to be used by
802.1X.

Valid values are MD5, and TLS.

DOT1XSTAT

Specifies the 802.1X supplicant operating mode.

Value Operation:

• 0: Supplicant disabled.

• 1: Supplicant enabled, but responds only to

received unicast EAPOL messages.

• 2: Supplicant enabled; responds to received

unicast and multicast EAPOL messages.

Table continues…

September 2017

Installing and Administering Avaya J129 IP Phone

Comments on this document? [email protected]

Содержание J129






































































































































Результаты поиска

Содержание J129

Отзывы:

Похожие инструкции для J129

Бренды по названию

Популярные бренды

Avaya J129, Установка и администрирование

Результаты поиска

Содержание J129

Отзывы:

Похожие инструкции для J129

Бренды по названию

Популярные бренды